Large-Sized Engine Lathe
 Large-Sized Engine Lathe Johor Bahru (JB), Malaysia, Mount Austin Supplier, Servicing, Supply, Supplies | Promach Machinery Sdn Bhd
大型普通车床

CW61100E CW62100E CW61125E ...CW61160 CW62160

ain prameters   type CW61100E CW62100E CW61125E CW62155E CW64100E CW62140E CW61125 CW62125 CW61140 CW62140 CW61160 CW62160 CW61180/1CW62180/1
  Swing overbet mm(in) 1000(40) 1250(50) 1400(56) 1250(50) 1400(56) 1600(64) 1800(72)
Swing overgap mm(in) 1250(50) 1500(60) 1650(66) 1750(870) 1930(77) 2110(84)  
Swing over carriage mm(in) 650(26) 900(36) 980(38) 900(36) 1100(44) 1280(51) 1480(59)
Maximum turning length mm(in) 1500-16000(60-640) 1500-16000(60-640)
Maximum weight of workpiece batween centers kg 6000、8000 8000、10000
Width of the bed mm(in) 755(33) 970(39)
Spindle noses No. ISO A2-15 A2-15
Diameter of spindle front bearing mm(in) 200(8) 200(8)、220(8.8)
Diameter of spindle hole mm(in) 130(5.2)  100(4) 130(5.2)、100(4)
Taper hole of spindle   Metric No.140 Metric No.140
Number of spindle speeds   手动21级(Manual operating)
Range of spindle speeds r/min 3.15-315   2.5-250(2-200) 3.15-315   2.5-250(2-200)
Main motor power kw AC22 AC22
Rapid travelling speed of motor power kw 1.5 1.5
Section of tool shank mm(in) 45×45(1.8×1.8) 45×45(1.8×1.8)
Swivel angle of tool post   ±90° ±90°
Travel of transvers tool post  mm(in)   200(8)   200(8)
Travel of longitudinal tool post    200(8) 400(16) 200(8) 400(16)
travel of cross slide mm(in) 520(21) 695(27) 720(28) 880(35)
Rapid travelling speed of longitudinal tool post mm/min 935 935
Rapid travelling speed of transverse mm/min 1870 1870
Rapid travelling speed of longitudinal mm/min 3740 3740
Metric threads number and range mm 45、1-120 45、1-120
Inch threads number and range T.P.I. 42、30-1/4 42、30-1/4
Modul threads number and range mm 46、0.5-60 46、0.5-60
Diameter pitch threads number and range D.P. 48、60-0.5 48、60-0.5
Longitudinal number and range of feeds m/rev 97、0.064-12 97、0.064-12
Transverse number and range of feeds m/rev 97、0.032-6 97、0.032-6
Longitudinal tool post number and range of feeds m/rev 97、0.016-3 97、0.016-3
Diameter of tailstock quill mm(in) 160(6.4) 160(6.4) 200(8)
Taper hole of tailstock quill   Metric No.80、Morse No.6 Metric No.80、Morse No.6
Travel of tailstock quill mm(in) 300(12) 300(12)
Weight of the lathe with 3m b.c. kg 10800 11500 12300 11200 12200 13200 14200
Additional weight par 1m b.c. kg 1200 1400
Machine overall dimension(length×width×height)(3m) mm 6100×1900×2000 6100×2000×2100 6100×2100×2200 6360×2100×2300 6360×1960×2400 6360×2060×2500 6360×2160×2600
Switch To Desktop Version